CU-HD1 high specification mains/battery operated defibrillator-monitor with semi-automatic and manual functions, printer and colour screen, optional pulse-oximetry, external pacing and 12 lead ECG.

Full Description

The new CU-HD1 is the ideal hospital or high end surgery monitor/defibrillator. It is supplied complete with a carry case and batteries.

• Efficient 'e~cube Biphasic' technology (BTE Type)
• Manual and AED operation
• Defibrillation using paddles, pads or internal paddles
• ECG Monitoring (3-lead / 5-lead / 12-lead ECG)
• SpO2 pulse oximetry with alarms (Nellcor)
• Non-invasive pacing mode.
• Shock delivery via multifunction defib electrode pads
• Shock advisory sensitivity and specificity meet AAMI DF-80 guidelines
• Voice and text prompts guide the user through the protocol via multifunction defib electrode pads
• Printer can be configured to print marked events, chacrge, shock and alarms

Dimensions: 318mm x 208mm x 355mm

Technical Data

• Display
- 7” TFT LCD (152mm x 91mm)
- Resolution 800 x 480 pixels
- Wave viewing time: 5sec (ECG)

• Defibrillation
- Defib common
Waveform: Truncated Exponential Biphasic (e~cube)
Charge time to 200J (Adapter): <5sec
Charge time to 200J (Battery): <7sec
- AED Mode
Energy Output: 200J
- Manual Mode
Energy Output (selected): 1 - 10J, 15J, 20J, 30J, 50J, 70J, 100J, 120J, 150J, 170J, 200J
Shock delivery: Internal paddle, external paddle (Paediatric)
Synchronous cardioversion

• Non-Invasive Pacing
- Waveform: Monophasic Truncated Exponential
- Mode: Demand and Fixed mode
- Amplitude accuracy: 0 - 200mA (± 5mA)
- Pulse width: 20msec (± 1msec)
- Pulse rate: 30 – 180 ppm (± 1.5%)
- Refractory Period: 340msec (30 – 80 ppm)
240msec (90 – 180 ppm)

• ECG Monitoring
- Input: 3-lead cable – I, II, III
Input: 5-lead cable – I, II, III, aVR, aVL, aVF or V
- Lead fault: “Lead Fault” message and dashed line displayed if electrode or lead wire becomes disconnected
- Heart Rate Display: 15 to 300 bpm (± 3 bpm)
- ECG size: 5, 10, 20, 40mm/mv and Auto Gain
- Heart Rate / Arrhythmia alarm: HR, Asystole, VFIB, VTACH

• 12-lead ECG
- Input: 10-lead cable – I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6
- Display view: All 12-lead ECG waves display simultaneously
- Transmission: SD data card

• SpO2 Pulse Oximetry
- Saturation: 70 – 100% (± 3 digits)
- Pulse Rate: 20 – 250 bpm (± 3 bpm)
- Perfusion: 0.2%
- Module manufacturer: Nellcor MP 100
- SpO2 Alarm: < minimum setting rate, > maximum setting rate

• Data Storage
- External memory card: SD card (ECG data, Event, Voice)

• Printer
- Continuous ECG strip: Real time (8 seconds delay)
- Print Speed: 25mm/sec
- Paper: 50mm wide

• Automatic Self-Test
- Power on self-test
- Run time self-test
- Manual self-test
- Periodic self-test (daily, weekly, monthly)

• Power Source
- External battery pack: Lithium Polymer
- Type: 14.8V, 3Ah (Rechargeable)
- Capacity (when new): > 100 shock deliveries @ 200J